led light engine, 23 linear module constant-current dc array, 6 led series x 8 parallel strings engineered by norlux 48 nichia leds 5 yr. warranty 0.48 [12.2] led pitch led 1 led 2 led 3 led 4 led 5 led 6 led 7 led 8 led 9 led 10 led 11 led 12 led 13 led 14 led 15 led 16 led 17 led 18 led 19 led 20 led 21 led 22 led 23 led 24 led 25 led 26 led 27 led 28 led 29 led 30 led 31 led 32 led 33 led 34 led 35 led 36 led 37 led 38 led 39 led 40 led 41 led 42 led 43 led 44 led 45 led 46 led 47 led 48 r 0.09 [2.9] (14x) 4.98 [126.5] 1.73 [43.94] 8.22 [208.79] 11.47 [291.34] 22.95 [582.93] dc in red (+) 12? #22awg blue (-) 12? #22awg tc drawing n0900-0162-r03 in [mm] 0.74 [18.8] height: 0.062 [1.58] fr-4 pcb 0.020 [0.5] leds 0.082 [2.08] total dimensions: specifcations driver type: constant-current drive current: 700ma nominal nom. forward voltage: 17.9v total board power: 12.5w nominal life: 50,000 hrs, 70% lumen maint. @ ta max 50oc, used as specifed max junction temp: 90c max test point temp: 80c operating temp: -40oc to +60oc ambient storage temp: -40oc to +80oc viewing angle (fwhm): 120 lambertian distribution cri: 83 typical ? designed for easy use in standard luminaires ? tight led pitch eliminates pixelization, no complex lens or optics required ? color: ? ansi binning, 3 step macadam ellipse ? suggested applications: troffers, troffer retrofts, linear recessed and flush-mount ? customizable: engines can be modifed to your application. contact us. rev 6-16-15 ?made in usa? of imported and domestic components for poke-in connectors, use #24-18 awg stranded or solid wire connectivity options suffx connection (blank) 12 in, #22 awg stranded leads -01 no leads -02 push-in connectors 23 inch linear dc led module model number color temp (k) total current (ma) total board power (w) lumens ( 15%) board lpw 98026 2700 350 5.9 797 135 700 12.5 1,537 123 98003 3000 350 5.9 850 144 700 12.5 1,639 131 98004 3500 350 5.9 893 151 700 12.5 1,720 138 98005 4000 350 5.9 916 155 700 12.5 1,765 141 98028 5000 350 5.9 944 160 700 12.5 1,820 146 thomas research products ? 1215 bowes rd ? elgin, il 60123 ? t 847-515-3057 ? f 847-515-3047 ? www.trpssl.com specifcations subject to change without notice. trademarks are property of their respective owners.
pg 2 of 2 cie chromaticity coordinates: tc (c) 65ma/led relative luminous flux / tc temperature 0 20 40 60 80 100 120 0.80 0.85 0.90 0.95 1.00 1.05 1.10 1.15 1.20 ? led12w-24-c0350 ? led12w-24-c0500 ? led17w-24-c0700 ? led20w-028-c0700 ? led20w-028-c0700-d ? led20w-028-c0700-le ? led20w-028-c0700-te ? led20w-48-c0350 ? led20w-48-c0350-d ? led20w-43-c0460 ? led20w-43-c0460-d ? led20w-40-c0500 ? led20w-40-c0500-d ? led25w-36-c0700 ? led25w-36-c0700-d ? led25w-36-c0700-hl-b ? led25w-36-c0700-hl-s ? led25w-36-c0700-hl-bd ? led25w-36-c0700-hl-sd ? led25w-040-c0500 ? led25w-040-c0500-d ? led25w-040-c0620 ? led25w-040-c0620-d ? led30w-042-c0700 ? led30w-042-c0700-d compatible trp drivers: the drivers listed here are all compatible with this module. choose the best driver for your application. 23 linear std. dc led light engine module step dimming: this light engine can be step-dimmed, with a recommended trp dimmable driver and sd series step-dimming module. see the sd2 or sd3 data sheet for wiring information. maximum run lengths the max number of boards wired in a chain (parallel or series) is limited by the max current rating of the frst board wired to the driver . the sum of the board currents, in the chain, funnels through the frst board. multiple chains can connect directly to the power supply in parallel. see table for max chain length. product series/parallel max allowable boards high current (nom) low current 23 troffer parallel 5 11 mounting notes the led assembly is supplied with mounting holes, per the dimensional drawing. it is important to mount the board in such a way as to maintain the tc point below the max. the steady state thermals in application will dictate if the board needs to be mounted directly to metallic housing and/or include a thermal pad. for example fully enclosed recessed fxture will require better thermal mounting than an open air pendant. thermal application notes this board requires additional heat sinking to run above 55oc ambient at nominal specifcations. heat sink is also required when operated above specifed drive currents. maximum current max current: 1440ma voltage at max current: 20v, power at max current: 28.8w the total maximum current refects the led maximum forward current only, without considering thermal needs. driving the leds this hard will likely violate their thermal limits, depending on the application. tc point must remain at or below the max temperature, or the warranty will be voided. temperature is directly correlated to led current. static sensitive device handle only at static-safe work stations. packaging 50 per box standard. parallel series constant current driver single chain constant current driver constant current driver single chain series/parallel confgurations parallel: the positive and negative of one board is connected to the respective positive and negative of the next. current adds, so the supply must be 2x the current for 2 boards, for example. series: the negative of one board is connected to the positive of the next. voltage adds, so the supply must be 2x the voltage for 2 boards. x y 0.3783 0.3836 0.3909 0.3906 0.3746 0.3687 0.3864 0.3757 4000k 3 step macadams ellipse x y 0.4045 0.3975 0.4189 0.4044 0.3989 0.3819 0.412 0.3875 3500k 3 step macadams ellipse x y 0.4325 0.4101 0.4452 0.4146 0.4244 0.3923 0.4362 0.3965 3000k 3 step macadams ellipse x y 0.4576 0.4183 0.4698 0.4212 0.4478 0.3999 0.4591 0.4025 2700k 3 step macadams ellipse x y 0.3408 0.3461 0.3485 0.3520 0.3416 0.3585 0.3499 0.3644 5000k 3 step macadams ellipse thomas research products ? 1215 bowes rd ? elgin, il 60123 ? t 847-515-3057 ? f 847-515-3047 ? www.trpssl.com ssl solutions faster than the speed of light ?
|
